Architectural Technologist – 3D printing the size of a house

Remember some time back I looked at 3D printing and thought it was the beginning of a new way to develop products and display Architecture, Well this chap has gone the next step and more, and produced a printer that will print a house. The article appears in Blueprint an online Architecture magazine.

In a small shed on an industrial park near Pisa is a machine that can print buildings. The machine itself looks like a prototype for the automotive industry. Four columns independently support a frame with a single armature on it. Driven by CAD software installed on a dust-covered computer terminal, the armature moves just millimetres above a pile of sand, expressing a magnesium-based solution from hundreds of nozzles on its lower side. It makes four passes. The layer dries and Enrico Dini recalibrates the armature frame. The system deposits the sand and then inorganic binding ink. The exercise is repeated. The millennia-long process of laying down sedimentary rock is accelerated into a day. A building emerges. This machine could be used to construct anything. Dini wants to build a cathedral with it. Or houses on the moon.

So whats it all about, well the article is long, but worth reading, can we print houses, I think this is the start.

Visit Vectorworking

Related articles by Zemanta

• Architectural Technologist – Makerbot 3D printing with Vectorworks (konstrukshon.com)
• Architectural Technologist – X3DMEDIA (konstrukshon.com)
• Architectural Technologist – 3D Printing Model Stairs with a makerbot (konstrukshon.com)
• Giant 3D printer can print buildings (theoretically) (makezine.com)
• Non-Enclosed 3D Printer Can Build Houses [3D Printing] (gizmodo.com)

Tagged as: Architecture, Arts, Collaborative Professional Development, Computer-aided design, Continuing professional development, CPD, Printing, Technologist, technology